6/10/2023 0 Comments Ip cam viewer settings ip cam pro![]() ![]() Please use our support forum if you need assistance with the iCamViewer app: Support forum for iCamViewer.Following are links to third-party software packages which might be required to use certain cameras with Blue Iris: To view a full sized image of your camera rotate your iPhone to the horizontal position. ![]() To view your other cameras swipe your finger from right to left on the camera screen. To add additional cameras, click on the plus button (noted below) and repeat step 8.Below is a snapshot of a live view using the iCamViewer app with a DPRO-B24DHR armor dome camera and a Vivotek video server. If the camera view is much smaller than the screen, close and re-open the iCamViewer and the image should be normal size. After you enter all of the configuration fields and click the check box, you should see a live view of your camera.If your Internet connection uses a static IP address, you should enter that IP address. Note regarding the Host or IP field: if you setup a dynamic DNS account, you should enter the hostname that you setup in that field. You can enter any value for the Name field, as this is name is used for you to identify this camera. When the "Configure Camera" screen opens, fill in all of the fields for your camera.Next, tap on the gear icon in the upper left of the viewer screen. Tap on the Viewer icon on the main navigation on the bottom of the app. You can download it here: iCamViewer in the app store. If you have not already done so, please download and install the iCamViewer on your iPhone, iPod touch, or iPad.If your Internet connection uses a static IP address, then you do not need to use the dynamic DNS service. For more information on setting up a free dynamic DNS service, please refer to these instructions: dynamic DNS setup. If your Internet connection uses a dynamic IP address, so should also setup a dynamic IP service in case your IP address changes. ![]() Now that your camera or server is connected to your LAN, has a static internal IP address, and port forwarding is setup, you are ready to setup the connection in the iCamViewer.Instructions for many different model routers can be found here: port forwarding instructions. If you want to access your camera from outside of the local area network that it is located, you must setup port forwarding for your camera by configuring your network router.Specific instructions for this step can be found in your camera's manual. This is very simple to do using Zavio or Vivotek IP cameras. If you have not already done so, it is recommended to assign your IP camera or server a static local area network IP address.You should use the IP detection software that is included with your camera to locate your camera on your network. Follow the normal setup instructions to connect your camera or video server to your network.IP Camera & Network Video Server iPhone App SetupFollow these instructions to setup your IP cameras or CCTV cameras that are connected to network video servers with the iCamViewer app. The video server is setup from that point on, the same as an IP camera. If you are using a CCTV camera (analog security camera), please first setup your camera with the video server of your choice, then proceed to the below instructions for IP cameras. Here is a list of compatible network video servers: CCTV Camera iPhone App SetupTo setup a CCTV camera for viewing using the iCamViewer, you must connect a network video server to your CCTV camera to make turn the signal from Analog to digital. ![]()
0 Comments
Leave a Reply. |